NT Server 4.0

                     NT Server 4 Comprehensive Questions

You have an administrator in domain1. Domain2 trusts domain1. What do you have to do to allow the domain1 administrator to be an administrator in domain2? PICK ONLY ONE!

a) create a local group in domain1
b) create a local group in domain2
c) create a global group in domain1
d) add the administrator account to the domain2 local administrator group

If you have a stripe set (without parity), and one disk fails, how do you retrieve the data using a fault tolerance method?

You have a Hewlett Packard LaserJet printer on a UNIX box, which you wish to print to via your NT Server. What protocol do you install?

What is the difference between the print spooler and router?

Domain A trusts Domain B) You want a user of Domain B to access a resource on a server in Domain A) How would you do this by creating only one account?

If you want to enable TCP/IP dial-up, where do you install RAS to?

When Printing from an Intel to a RISC based printer, where do the drivers need to be?

What do you need to print using TCP/IP from Line Printer Daemon (LPD)?

What is the default spooler location?

How does Gateway Services for Netware do what it does between a NT workstation and a Netware server.

You change the ReplicationGov. Setting on a BDC) What effects does this have?

Adding WFW 3.11 machine to domain. What needs to happen?

NT Server connected to UNIX, want to use HP Printer connected to UNIX machine, NT clients will be running NWLink. What other protocols need to be running?

How can you tell if you have excessive memory paging?

A server has poor performance and you suspect that it's paging excessively. What do you do?

You have 2 domains, guest account is disabled on both, Domain A and B) Want all users in both domains to have access to a resource in Domain A) What 2 steps do you have to perform? You Want to use only one group to manage?

a) Create local group on A
b) Create local group on B
c) Add all users to global group on A
d) Add all users to local group on A

Give the two steps required to do a network based installation of windows 3.11?

List the steps to create a server based home directory for a user?

15 scientists work on a collective pool of data) Each user is responsible for security and backup of the information. Which domain model should you use?

Which variable in the registry do you change to slow down replications of accounts?

You install a new video card and you get no video, what do you do? Emergency disk, or reboot w/ last known good, or reboot to VGA and install new drivers.

How do you recover a failed drive from a mirrored set.(assuming boot drive fails)?

Know the advantages and disadvantages for mirroring, disk stripe, and disk stripe w/ parity?

A 3.11 user has been set up to be able to access resources on a domain. The user can access a printer, but cannot access a shared directory. What would you do to troubleshoot this problem?

Susan is an administrator in Domain a) Domain B trusts A) How do you let Susan administer Domain b?

Netware users need to access an SQL database on an NT server, what must you do to set up this function?

A server in your domain has Mac connectivity in place, what must you do to allow the Macs to use resources on other servers in the domain?

List the protocols that can be used with a RAS connection. (RAS server)?

If your machine uses SLIP, in what capacity can it operate) Only as a SLIP client to an external SLIP server?

Users need to access, through RAS, a Netware server, what protocols and/or services need to be in place?

You install server and have made many changes in the last few days, now you can't log in, what do you do?

Same question, but you can log in, but program manager won't respond) What do you do?

How can you minimize memory usage when there are less than 10 users connected?

You want to control some printers with an NT server, and you have machines running windows 3.11 and UNIX, how would you set this up?

You connect a new HP LaserJet to a printer pool, but the HP port option does not show up in print manager, what could be wrong?

How does an NT machine communicate with an UPS system?

A user in Domain A needs to access a share in Domain B) Domain B trusts Domain A, what needs to be done to let user access the share?

You begin auditing an NT machine, where do you look at the data?

Which window do you use in performance manager to record and save data?

How do you set up the browser to send browse information to a LAN manager 2.x system?

Which built in groups can create and share a directory?

Which groups can you audit, default groups, everyone, server ops.?

Steps to connect a 3.11 machine to the domain. What is required?

Machine is using PPP in RAS, this machine can act as 1. PPP server, PPP client, what else?

RAS clients are being randomly disconnected, the setup is correct, where would you look for more information?

For an NT box to export a file, the machine must be NT workstation or server in domain or workgroup. Which of the four?

When copying files to another NTFS directory, what happens to the ownership and security permissions?

A server is running NWLink, what resources can a user running Netware client access?

A server running gateway for Netware networks can do what?

What is needed on both ends (protocols, services) to connect a Mac to an NT server?

You copy an NTFS directory to a FAT partition, what happens to permissions and filenames and ownership of the files?

A disk in a stripe set w/ parity fails, steps to recover?

Files in a common directory keep disappearing, no one will fess up to deleting the files, how could you explore this problem?

What requirements are there to backup a system registry?

A user in an untrusted domain can't see a share, what can you do to let him see the share?

Three domains, users in all three need access to resources on a server in domain one, what trusts need to be set up to accomplish this?

What hardware is needed to accomplish disk duplexing?

Domain W trusts Domain E, a user in Domain W needs access to a share in Domain E) Guest accounts have been disabled in each Domain, how can user access this share?

Corporate setting, 150 users with 5 servers in a centralized office) MIS wants to keep complete control of user accounts and resources. Which domain model would you use?

A user needs access to NT and Netware servers, how is this done?

You have set up an NT server with Gateway for Netware and the server must server to printers on a Unix network, what protocols must be in place?

Which server feature eliminates the need for the LMHosts file?

Corporate setting, 30000 users, MIS wants total account control, but wants departmental managers to control local resources. Which domain model would you use?

Two domains, user needs access to a server in other domain, you want to use one group to accomplish this, what do you need to do?

Domain E trusts Domain N. You create a local group in domain E) What can this group contain?

You suspect excessive paging, what do you check in performance manager?

You install a new serial mouse, and you old mouse was a bus mouse, what do you need to do?

You install a second Ethernet card, what settings do you need to verify to avoid any conflicts?

Question asks about a DHCP window setting, and what can this machine do?

You install new SCSI drivers, and your system won't boot, know the steps needed to use the emergency repair disk?

You want to add a third HP printer to a printer pool, what do you need to do?

You have a group of 15 researchers that need a network for print and some file sharing. Security is of ultimate concern because of the nature of the work. What type of network should you implement?

a) Complete trust domains with each researcher administer of his own server.
b) Master domain model
c) Multiple master domain model
d) Single domain model with each researcher made an administrator of the domain.
e) Workgroup with each researcher administer of his own workstation.

Which users can create shares?

a) Admin
b) Power Users
c) Server Op
d) Users

Unsupported internal modem, how do you configure it?

a) Use null port for modem
b) Use unsupported modem from list of modems
c) Change switch.inf
d) Add modem calls to modem.inf file

RAS connection fails, where do you look?

a) system.log
b) device)log
c) modem.log
d) serial.log

You make changes to services installed where will it be updated in the registry?

a) Local_Machine
b) Root_Class
c) Local_User
d) Current_Local_User

Replications Governor is configured, what will it do?

a) Decrease buffer size calls from PDC to BDC
b) Decrease buffer size calls from BDC to PDC
c) Decrease frequency calls from PDC to BDC
d) Decrease frequency calls from BDC to PDC

What can be an Export Server?

a) NT Workstation in a domain
b) NT Workstation in a workgroup
c) NT server in a domain
d) NT server in a workgroup

You have 4 SCSI 2GB drives. You want fault tolerance) You want to
be able to should one of them fail. You want to utilize disk space as
best as possible, what do you use?

a) disk mirror
b) stripe set
c) stripe w/parity
d) volume

You have 2 SCSI drives each with a 1GB partition with their own disk
controllers. you want fault tolerance and you want to be able to
continue to use one of the drives should they fail, what do you use?

a) volume set
b) disk duplexing
c) stripe
d) stripe with parity

You have 2 Netware servers and 100 Netware clients. You want to add
an NT Server with SQL resources. You make the NT Server a member of the Netware domain, then what?

a)     create a local group on the member server
    place the users in a global group
    place the global group into the local group
b)     create a global group on the member server
    place the users in a local group
    place the global group into the local group
c)    create a local group on the domain
    place the users in a global group
    place the global group in a local group
d)    none of the above). you only need NWLink

You have a RAS Server in which clients of MS-DOS and Win95 call
into. They have Client for MS Networks and NWLink installed) You have
a Netware server. You want the clients to be able to access all
resources on BOTH Netware and NT. what do you install on the NT Server?

a) CSNW
b) NWLink
c) GSNW
d) RIP

A printer has stopped working. It is connected to your NT Server.
You want to move the queue print files to the network directory. How?

a) Network neighborhood).Copy files to the network printer pool
b) Network neighborhood).Move files to the network printer pool
c) Reconfigure ports of the NT Server printer to the UNC name !
d) delete printer and reconfigure ports through a UNC name

What file do you need for the boot.ini for SCSI?

What can be an export computer?

How do you connect a Win95 to a share on NT Server using the Admin
Tools?

You have NT Server computer. You install the client Network Admin
Tools on your Win95 workstation. How can you remotely manage file and directory permissions? Server Manager or Windows Explorer?

If you have two network cards, to be able to assign IP addresses,
would you use DHCP or would you specify IP address manually?

If Netware clients would like to use resources in your NT network
would you use only NWLink IPX/SPX compatible protocol or Would you need
NTGATEWAY?

In NT Server or Netware Server, do you use NTGATEWAY ACCOUNT OR GROUP?

How can a user be notified a print job finished? Do you have to put
the user to the backup operators group?

If you want to grant permission for a user to connect to a RAS server
would you use User Manager for domains or use Remote Access Admin?

If someone delete a file accidentally, do they have to be in the Backup Operator or owner to be able to restore file from tape?

If print server fails how can you move print jobs to another server?

If you want to speed up Network access in RAS, the users are using NetBEUI over TCP/IP. Would you give priority to NetBEUI or TCP?

If you are installing an NT server from a DOS client what should you do exactly in the installation files are in shared directory?

If the server with mandatory user profiles is down, can user not
logged on or can they use default user profiles?

In stripe set with parity for 4 hard disk with each 100 MB, would you choose the option 400mb or 300mb? Why?

If you are upgrading from 3.51, can you start from 3.51 and type
Winnt?

Do you have to install SNMP to server or workstation?

You need to create the 3 setup disks. Do you format the floppy from an MS-DOS computer or a Windows NT computer?

You have a RAS Server setup on your network...there is a database on another server on this network...NT WS users need to access the database using encryption...however, other remote users need to access the network (not database and not encrypted). How do you setup encryption for the WS users?

a) Encryption per modem port
b) Encryption per user
c) Encryption on the database server

Directory Replication...which machines can be exporters and which can be importers?

You add a SCSI ' Network card, after starting NT 4.0 you get a message ="Dependency service failed to start" Where can you find more information?

a) bootlog.txt
b) Device)log
c) Service Option in Control Panel
d) Event Viewer

You create a printer - network interface is an HP LaserJet print device) =Print Manager 'Network Port' does not appear why?

a) Print device configured by another printer
b) DLC not installed
c) Print device not properly configured to use option i/o port
d) did not select HP Laser Jet compatible driver

Trouble printing - you do not have space on the system partition, what do you do?

a) Use NT explorer to drag spool directory
b) Change Properties - move spooler to free disk space
c) Change Printer Properties for each printer
d) Disk Admin extend system partition

You want to Tape backup of registry files of NT server, how do you do it?

a) use Differential backup type
b) use backup from remote server
c) specify one file on the volume containing the registry
d) Stop Server Service

You change a group permission for a directory - but user still has not =access. What is happening?

a) wrong password
b) change needs user to logoff and back on
c) not replicated yet.

How many disk controllers and HD are required for implementing a
stripe set with parity?

You have a network with an NT server, some NT workstations and some
Windows95 workstations. The backup policy is to backup the server every
night and backup all the data in the workstations once a week. What is the minimum Hardware requirement for implementing this policy?

a) One tape on the server or
b) One tape on the server an one tape in the NT workstation
c) One tape on a Windows 95 workstation and a tape in an NT workstation

You have an NT RAS server. You have two kind of RAS clients accessing
the server:

a) The first group: Windows NT workstations
b) The second group: Computer with other Operating system with a Third
party PPP slip protocol implementation.(No encryption supported)

How can you configure the RAS server for using encryption when an NT RAS workstation dials in and for skipping the encryption process when a user of the second group dials in to the RAS server?

The bootable partition fails. How to create a boot diskette for booting the system to the mirror partition. can this diskette be formatted with Dos?

Upgrading NT 3.51 into NT 4.0. You want to keep all the previous
account information. In which directory you must install NT 4.0?

Can workstations that only have the Netware client access an NT server?

You have a TCP/IP network. There is one group of people that need
access to a very heavy application on the server. When they do so the
network slows down. How can you solve the problem?

How do you restore the registry when the system disk dies?

How do you restore striping with parity after system disk dies?

How do you upgrade a member server to a BDC/PDC? PDC/BDC to member server?

How do you upgrade a workgroup to a domain when you get your first PDC?

How do you move a PDC from one domain to a BDC in another domain?

User in global group is granted access to folder in trusting domain. Global group is a member of local group in trusting domain w/ change rights to an NTFS folder. Global group is granted read permission to the NTFS folder, and read share permission. Which rights are retained?

A computer is setup as a TCP/IP router. What needs setup on it to route requests for a DHCP server on one subnet to a DHCP agent on another?

If you forgot to create installation diskettes, but created an emergency boot disk, how would you use the emergency boot disk?

How do you reduce traffic from PDC to BDC on the PDC? Increase Pulse or Pulse Concurrency in the registry?

What program do you use to read .dmp files?

In Performance monitor, What do you set to run a test on a multi-processor computer to test all processor's?

What fault tolerance uses 2 HD's and 2 hard drive controllers?

What disk setup for 6 disks would be the fastest?

How do you recover from 2 disk failure with disk striping w/ parity? 1
disk failure?

How do you recover from disk mirroring?

How do you access an NT Server from Netware workstations?

What user do you add to Novell for gateway services?

What do you add to client workstations after Novell to NT migration?

Users want to login via RAS. Need secure encryption for passwords and data sending. What encryption would you use?

Can NT40 use NT3.51 printer drivers, and vice versa? Why? Why not?

How can you connect to multiple RAS sites, UNC or drive mapping

Connecting to a Netware server through a RAS Server. What do I
need ?

How can I manage printer security on a NT Server through a WIn95
workstation?

Where do you install SMTP for monitoring TCP/IP traffic?

RAS, channel bundling, call back: does the RAS server dial
simultaneous or one by one? Why?

You manage 4 NT Server from your NT Workstation and want to be
alerted, if one of them has less than 25% free disk space) Which steps
are necessary?

Can a WIN95 Workstation import Replication?

What tool would you use to analyze potential bottlenecks in a Windows NT system?

Your Windows NT machine refuses to start. On analyzing your most recent actions, you realize that the video driver you installed was a pre-release version. Windows NT now refuses to start. What should you do?

Bob has an account in the ACME domain, and is a member of the Manufacturing local group and the Supervisors global group. Bob wants to access a file on a server in the CORP domain. How should his administrator go about giving him access?

Your main file server is running slowly. You run the Browser Monitor utility from the Resource Kit and discover that it is currently the browse master. How can you configure the system to ensure that this machine is never the browse master?

You wish to create a share which is invisible to users browsing for shares. How do you accomplish this?

How would you start an application called flopscan.exe with a higher priority than other applications?

You want to create a Windows NT print queue for a Hewlett Packard laser printer which is directly connected to the network through a Hewlett Packard Jet-Direct interface card) What action must you take before you attempt to create the printer queue?

Your Windows NT network uses the TCP/IP protocol exclusively. There is no WINS server on the local network, but you want to connect to a share located across a router. How can you do this?

From the console of your Windows NT 4.0 server, you wish to add a shared printer which a Windows NT Workstation 3.51 client can print to. What action should you take?

You want a user to automatically execute a batch file at login time) Which of the following steps do you need to complete?

You have recently installed a second processor in your Windows NT server to improve performance) What action should you take to configure Windows NT appropriately?

A user John, in your domain works at several different workstations.
John says every time he logs on he gets a different desktop, how do you fix this?

a) Create a policy file on each of the NT workstations
b) Synchronizes all workstations
c) Create a roaming profile for the user
d) Start the Replication service

You create home directories for 2 users on NT server. User 1 on NT
Workstation and User 2 on WFW. After they both log on, User 1 has access to her directory but User 2 cannot access his directory.
What do you need to do?

a) Start Replication service)...
b) Relocate User 2's home dir. on WFW computer
c) Map a drive on User 2's WFW computer to her home directory on the
server
d) You cannot do this. Home dirs. only for NT computers.

You have to stop an individual from logging on to a NT Server by using
the Administrator account.

a) Delete the Administrator account
b) Lock the Administrator account
c) Rename the Administrator account
d) Disable the Administrator account

You assign a group to allow a user to create USER accounts and groups in a domain, but you don't want the user to assign user rights. What group will achieve this?

a) Server Operators
b) Administrators
c) Account Operators

You connect to a shared directory on a NT server. Which special group
are you automatically a member of?

a) Interactive
b) Network
c) System
d) Creator Owner

You want to shut down an NT server to install new hardware) What NT
server utility do use to disconnect users that are currently using the
server?

a) User Manager
b) Windows NT Explorer
c) Server Manager
d) Disk Administrator

The RESEARCH dir. is located on an NTFS partition. Permissions for the
RESEARCH dir. is CHANGE for the Engineering group, ADD and READ for the SALES group, and NO ACCESS for the Marketing group. Sonya is a member of the Engineering, Marketing and Sales groups. What permission(s) will
she have?

a) ADD ' READ only
b) NO ACCESS only
c) CHANGE only
d) ADD, READ and CHANGE

You have 40 clients who spend most of their time accessing LAN resources
using NetBEUI. Only rarely do they use TCP-IP to connect to the WAN. How do you optimize?

a) move NetBEUI up on the server
b) move NetBEUI up on the clients
c) move TCP-IP up on the clients
d) move tcpip up on the server
e) binding order will not make any difference)

What do you do if setup does not detect your IDE CD-ROM?

How do you do an over the network install of NT server?

What do you check if you want to see if your server is experiencing
excessive paging?

What you do if you want to monitor your TCPIP implementation for a week?

You have two drives. Your paging file is on your system partition on drive one) How can you improve performance?

You have a user who gets promoted to the managers group from sales. You assign him to the managers group, but he complains he can not access the managers shared directory. Why?

How do you manage printer security remotely?

You have 3 Win NT servers with RAS installed on 3 different network
segments. Win NT workstations dial into the servers.
How would you minimize the time to resolve the NetBIOS names?

a) Local LMHOSTS file
b) LMHOSTS file on RAS server
c) Disable NetBIOS interface
d) Install WINS on Workstations

A Win NT Workstation dial into a RAS server with the following setup:

a) Dial Out Protocol
NetBEUI
TCP/IP
IPX/SPX

b) Remote Clients
NetBEUI
TCP/IP

c) Encryption
Clear text..

d) All of the above

What is the WS able to do (select all correct)?

a)    Use resources on the RAS server
b)    Use applications that require Win Socket
c)    Use applications that uses NetBEUI

You have a mirror set with SCSI disks with BIOS enabled and one disk
fails. How do you set up the ANC path on your boot-disk?
Disk 0: system, Data, Data
Disk a) Data, Mirror set, and Data

a)    multi(0)disk(0)rdisk(a)partition(b)
b)    multi(0)disk(0)rdisk(a)partition(0)
c)    multi(0)disk(0)rdisk(a)partition(a)

You have a network with one NT server, 10 Win95 clients and 5 NT WS.
Every day you want to back-up the server and once a week you want to
back-up the clients (95'WS). How do you do that?

a)    Put on Tape station on the Server
b)    Put Tape station on WS and 1 on 95
c)    some other possibilities

You have a Win95 PC with client administration for NT installed and a
Win NT Server. You want the computer to be able to connect to a Netware
Server. How do you do that?

a)    Map the drive on the Netware Server
b)    Server Manager - Shared directories
c)    GSNW
d)    User manager for domains - Logon To..

You have a computer with 5 disks - each with 2 partitions. On the first
disk is the boot and system partition. How will you optimize the
pagefile?

a)    Split the pagefile on the other 4 disks
b)    Put the file on the boot an system partition
c)    All of the above
d)    None of the above

You have a computer and you have enabled audit like this:

a) WRITE) Success and Failed
b) Change Permissions: Success

The permissions only relate to files in the folder and not
subdirectories.

Choose the right one

a) You will get an entry if a user tries to delete a file in the
folder
b) You will get an entry if a user tries to write to a file in the
folder
c) You will get an entry if a user tries to write to a file in a
subfolder


You have 30 MS-DOS machines and 20 WFWG machines and you want them to be able to connect to 2 Netware Servers. How?

a)    RIP
b)    NWLink
c)    GSNW

You have a NT Server running IPX and some kind of client also running
IPX, but they are not able to connect. Why?

a) Wrong subnet
b) Wrong Frame Type
c) Permissions are set to No Access

You want to back-up WinNT Registry with NT's back-up program. How?

a) Differential
b) Run WinNT back-up program from a remote computer
c) Stop Server Service
d) Specify a folder that contains a least on file the has something
to do with registry

You have a document that will not print because of lack disk space) What do you do?

a) On the Server, go to registry and specify a new location for the
spool file
b) On the Printers go to registry and specify a new location for
the spool files
c) Use explorer...

A user with a Win95 client connects to a shared printer, but cannot
access. The administrator puts her in a group with correct rights, but
still she can't connect. Why?

a) She user wrong password
b) She does not have an account in the domain
c) The change of group will not take effect before she logs off

You have a Winnt Server that runs IPX, and you have a Netware client.
What will the client be able to access?

a) Directories
b) Printers
c) Client/server applications that support NetBIOS
d) Access nothing

How would you install Win95 over a network? (Choose all)

a) Share Win95 Installation files
b) Make installation startup disk with Network Client Administrator
c) Make Installation disk set with Network Client Administrator
d) Install from disk
e) Install from disk set

You have installed a monitor on your WinNT Server, but when you test a
resolution, it fails. Therefore you install another video card) What must you do? (choose all)

a) Reinstall NT Server
b) Start up in VGA-mode

You have a network with a PDC and 2 BDCs. You decide to use the PDC as
an application Server. What do you do?

a) Promote a BDC to PDC and demote the PDC to member server
b) Shut down the PDC and promote BDC to PDC
c) Shut down the PDC and the BDC you want to promote, Start the BDC
up again and it will automatic become PDC

You have a network that uses IPX/SPX.. Half uses 802.3 and the other
half uses 802.2. You add a computer running WinNT Server with 1 network
adapter installed) How can all clients running IPX/SPX access NT?

a) RIP
b) Auto Frame
c) Manual Frame
d) First install a driver for 802.2 and then install a driver for
802.3 to the same network adapter

You are running Performance monitor on a NT Workstation. You are
monitoring memory and disk performance on 10 WinNT Servers. Performance
on the Workstation is poor and you want to increase performance but how?

Your pagefile has increased its volume) How will that affect the system? (choose all correct)

a) Applications will start more slowly
b) I/O of the network will increase
c) The disk will be de-fragmented
d) Current content of the pagefile will be lost

You want to make it easier for yourself to make user acounts. Therefore
you make a template called USER_TEMPLATE and assign permissions and
groups to the template) How do you use the template when you make new
accounts?

a)    New account automatically get the permissions and groups specified in the template)

b)    You have to create a global group called USER_TEMPLATE and put
new accounts in here)

c)    You simply copy USER_TEMPLATE to a new account.

d)    You create new accounts and highlight them, and copy
USER_TEMPLATE into them.

You want to monitor disk space usage on a WinNT Server. You want to be
notified when disk space left is under 25%. How?

a)    Server Manager - Alerted
b)    Performance Monitor - Alert on % Free space counter
c)    Start Diskperf with AT-command in Schedule now and then

How can you share a CD-drive on a WinNT Server when you are running
Win95 and client administration tool?

a)    Server Manager
b)    User Manager for Domains
c)    Explorer

You have a network with 3 NT Servers. In the network there is 50
Workstations. All computers are running TCP/IP. Now and then a group of
people have to copy 100MB of data to one of the servers. That slows down the network. How can you prevent this?

a)    Install a new Network adapter card on a different subnet and
enable IP-routing
b)    Let them run NetBEUI
c)    Give the same Network Adapter 2 IP -addresses

You have a Network printer that prints for WinNT 4.0 and WinNT 3.51
users. What about the driver?

You have a network printer, but when you try to access it you cant see
it. Why?

a)    The printer is already installed
b)    You forgot to install DLC
c)    Wrong driver
d)    You forgot to specify the printer port

You have 3 PDCs and a user have a mandatory profile on the server. Now
the Server fails and shut down. What happens?

a)    The user cannot log on
b)    The user can logon and gets the default profile
c)    The user can logon but cannot change password

If you have to create a boot-disk to a computer with SCSI-disks with
BIOS disabled, what file do you need?

You move a file from a NTFS to a FAT partition on the same disk. (choose all)

a)    The permissions are discarded
b)    The LFN are inherited
c) Permissions are retained
d) Inherits the permission of the directory

What must be installed before you can migrate users from a NetWare
Server to NT

a)    RIP
b)    GSNW
c)    SAP Agent

You have installed client based admin tools on your win95 machine and you want to change file level permissions on an NT 4.0 server. What program would you use?

a)    Server Manager
b)    User Manager for Domains
c)    Windows Explorer
d)    Something definitely wrong

You have installed client based admin tools on your win95 machine and you want to [do something with printers] on an NT 4.0 server. What program would you use?

a)    Server Manager
b)    User Manager for Domains
c)    Windows Explorer
d)    Control panels --> network

You have two Netware 3.x servers and 100 Netware clients. You want to add a Windows NT 4.0 Server. What needs to be installed on the NT Server?

a)    NWLink IPX-SPX
b)    Gateway services
c)    RIP Services

You have x DOS users and X win95 users who will RAS in. The DOS client
supports [only] DES encryption. How can you set the RAS server for maximum authentication security?

a)    Require Microsoft Encryption
b)    Require [any] encryption
c)    Allow anything including plain text
d)    Text only

How could you configure the RAS server to allow users to specify their own security level?

a)    Require Microsoft Encryption
b)    Require [any] encryption
c)    Allow anything including plain text
d)    Text only

On a non-routing RAS server, what can be configured through DHCP on the
client? [multiple]

a)    default gateway
b)    DNS server address
c)    WINS server address
d)    Subnet mask
e)    [maybe one more]

If a printing device is stalled, how can you fix it?

a)    Stop and start the printer
b)    Reset the printing device

If a printing device [goes screwy] and you want to redirect the jobs that are pending, how can you do this?

a)    Cut and paste them from the bad print manager to the one you want to redirect to
b)    Drag and drop them from the bad print manager to the one you want to redirect to
c)    Change the port setting of the stalled device to the UNC of the desired printing device
d)    Delete the bad printer and [start over]

If you want to create a printer pool, what must be the same between both printing devices?
a)    They must be connected to the same physical port
b)    They must have the same name
c)    They must use the same driver

You want to manually configure the TCP/IP settings on a server. Other than the IP address, what must you configure?

If there are consistently less than 10 users connected to a server, where would you go to minimize memory used?

You are planning on using the Netware Migration utility, what must you
first install on the server?

You have 2 2g SCSI drives, each with 2 partitions of 1g. The system files are located on the first physical disk. Performance is low. How would you fix?

a) increase paging file size
b) decrease paging file size
c) move paging files to another partition on the first disk
d) move paging files to the other physical disk

Where to setup remote monitoring; from the target server/client or from
your workstation?

What happens when you have checked these particular auditing features and some one access these files?

You have a domain net with 5 server. TCP/IP is uses. 3 departments.
The research department often copies big files to one of the servers
(name) Servera) slowing down the whole network. What do you do?

a) Install NetBEUI on the one server and the department
b) Assign the Network card in Server1 a second IP-Address and make the
research department a logical subnet.
c) Same like 2, but second network card in Server 1.

You can make the 3 Boot disks by:

a) Run Winnt on a dos computer?
b) run Winnt in the dosbox of an NT-PC?
c) run Winnt with the explorer ?

"You are manager of an environment with fifty Netware clients running IPX over the 802.2 frame type, and fifty Netware clients running IPX over the 802.3 frame type) How should you configure the server?

a) Install RIP for IPX
b) Install IPX, select the manual frame type detection option from Network Control Panel and select both protocols
c) Install IPX, select automatic frame type

If a printer on a server goes down, how could you copy the spool file to another printer on the network?

What file you need on a boot disk for NT of you have a SCSI card)

If a server has less than 25% disk space left, you want to set up an alert to let you know, you are doing this from a Workstation. What do you do?

How do you Use an NT boot disk to boot the server to recognize a mirrored boot partition after a hard disk failure?

Do you use NW Link or NWGS on an NT server for a Novell client to
use a client/server dB?

What is the role of NWGS on NT?

What is the total Hard disk space from four 250 HDD configured with Raid and Parity?

What are the Replication roles on NT workstation, Windows 95, NT Server?

What are Trust relationships?

What profile is used by clients when a PDC that contains a mandatory
profile is down?

You have a Domain with one TCP/IP segment and no router => group of users transfer many files that slow down network, Solution?

How to backup registry? Can you Remotely backup the registry?

You Need to install tape backup unit to backup entire server and data directories on workstation. The choices are NT Server, NT workstation, and Win 95 clients. Which one do you use?

You have a RAS server with NT workstation remote users who need access to another server and encryption. Other remote Win 95 clients who don't need encryption. What do you do?

Upgrading NT 3.51 to NT 4.0, which WinXXXX.exe program do you use? When?

How to speed NetBIOS resolution on remote NT workstations?
Options:

a) Run Wins on remote NT workstations
b) Use LMHOSTS file on RAS server
c) DNS
d) Use LMHOSTS file on Remote Workstations.

Setting up CDROM share on server from a Win 95 with NT Admin Tools?
Options:

a) Server Manager
b) Explorer
c) File manager

Promoting a BDC to a PDC) Possible options:

a) Shutdown PDC and promote BDC, former PDC will automatically be demoted to BDC upon startup.
b) While BDC and PDC both online Promote BDC to PDC, former PDC
will automatically demote) Chose 1st option.

Need to change PDC to a server and promote a BDC to PDC)
Options:

a) Demote PDC to server and promote BDC)
b) Reinstall PDC to server and promote BDC)
c) Promote World Peace)

Cannot recognize HP printer on network from server.
Options:

a) Load HP driver
b) Load DLC
c) Load FTP

Installing new printer on a NT 4.0 server. NT 3.51 workstations.
Options:

a) Load NT 4.0 printer driver only.
b) Load NT 4.0 and NT 3.51 printer drivers.
c) Load NT 3.51 printer drivers only.
d) Load NT 4.0 drivers on 3.51 workstations.

What file on an NT boot disk with system files has SCSI info?

What do you check if you want to see if your server is experiencing excessive paging?

What you do if you want to monitor your TCPIP implementation for a week?

You have two drives. Your paging file is on your system partition on drive one) How can you improve performance?

You have a user who gets promoted to the managers group from sales. You assign him to the managers group, but he complains he can not access the managers shared directory. Why?

How to manage printer security remotely?

A user John, in your domain works at several different workstations.
John says every time he logs on he gets a different desktop.

a) Create a policy file on each of the NT workstations
b) Synchronize all workstations
c) Create a roaming profile for the user
d) Start the Replication service

You create home directories for 2 users on NT server. User 1 on NT Workstation and User 2 on WFW. After they both logs on User 1 has access to her directory but User 2 cannot access his directory.

a) Start Replication service)...
b) Relocate User 2's home dir. on WFW computer
c) Map a drive on User 2's WFW computer to her home directory on the server
d) You cannot do this. Home dirs. only for NT computers.

You have to stop an individual from logging on to an NT Server by using the Administrator account?

a) Delete the Administrator account
b) Lock the Administrator account
c) Rename the Administrator account
d) Disable the Administrator account

Assign a group to allow a user to create USER accounts and groups in a
domain. You don't want the user to assign user rights

a) Server Operators
b) Administrators
c) Account Operators

You connect to a shared directory on a NT server. Which special group are you automatically a member of?

a) Interactive
b) Network
c) System
d) Creator Owner

You want to shut down an NT server to install new hardware) What NT server utility does use to disconnect users that are currently using the server?

a) User Manager
b) Windows NT Explorer
c) Server Manager
d) Disk Administrator

The RESEARCH Dir. is located on an NTFS partition. Permissions for the RESEARCH Dir. are CHANGE for the Engineering group, ADD and READ for the SALES group, and NO ACCESS for the Marketing group. Sonya is a member of the Engineering, Marketing and Sales groups.

a) ADD ' READ only
b) NO ACCESS only
c) CHANGE only
d) ADD, READ and CHANGE

Where do you set AUDITING?

a)    User Manager for Domains (UMD) to set Audit Policies on FILE '
OBJECT ACCESS.
b)    Use Explorer to select the events audit.
c)    You cannot Audit FAT.

Who can take ownership of a file and then how to organize ownership to someone else?

a)    Admin take ownership
b)    Assign Take Ownership permission to other user
c)    Have other user take ownership.

Where do you start/stop print spooler to restore stuck printer?

Where do you optimize (server service) for large LAN using SQL server app?

How do you via MS-DOS install NT over network?

If the user is assigned a .man (mandatory profile) and the server is down, can the user log on?

What can DHCP assign besides IP address? WINS address, DNS address?

NT as a router- what to assign to 2-NIC cards- static IP address?

How do you use Perf mon - to view for month long comparison of data on network?

SNMP where do you install it?

With excessive page file swapping - what counters to watch?

What does diskperf -y do?

What is the first step to recover from mirror drive failure?

How do you modify boot.ini for Scsi?

How do you make backup of registry including user and SAM info on local server?

What is the best read performance of fault tolerance choices?

IPX on client and server but can't communicate, what is the possible problem?

To configure for a workgroup to change to single domain when you get first PDC, what do you do?

Disk striping, one fails, first thing you do after installing new disk? And do you have to restart computer?

NW clients need to access NT server SQL apps. What do you install on server?

Where do you locate export login scripts for replication?

The Scsi drive is not enabled - what file to copy to boot disk?

Where do you set RAS to have use callback enabled?

What do you set in RAS to allow users access to network?

What to do to enable users to access Winsockets application on another server?

What do you do if you want to be alerted when disk space available drops to less than 25% on 5 different servers?

You want an alert to go to all admins. How do you do it?

You have a FAT formatted drive that you want to safely convert to
NTFS, how do you do it?

Your NT 4 server is being used as a router, you have two network cards installed in the system, What do you have to do in order to successfully configure the NICs?

a)    Manually assign a unique IP address to each card
b)    Manually assign the same IP address to each card
c)    Let DHCP automatically assign a unique IP address to each card
d)    Let DHCP automatically assign the same IP address to each card

You have configured your PDC for mandatory roaming profiles, the PDC goes down. How will clients be able to log in?

You have a printer on the network that is directly connected (not attached to a PC) that you would like to administer over but you can't find it on the network. How do you find it?

You have two physical disc drives connected to two separate controllers, what is the best method of fault tolerance?

You have printer jobs that are backed up due to a large print job, you want to assign another printer to temporarily handle the load) How do you do this?

You want to establish a printer pool, what has to be true before you start?

Romain has called to complain that the she keeps sending jobs to a network printer but they are not printing. What can you do?

You have installed client based admin tools on your win95 machine and you want to change file level permissions on an NT 4 server. What program should you use?

You have RAS clients that are dialing in and require DES encryption, what type of encryption do you choose on the server?

You have 2 2gig SCSI drives. The system files are located on the first physical disc and your Performance is low, how can you improve the performance?

You have 3 WinNT servers with RAS installed but it's taking too long for your RAS workstations to resolve their NetBIOS names. What can you do to improve performance one these workstations?

You are backing up your server and workstations but the backup runs into the next business day, How do you decrease the amount of time it takes to complete these backups?

You have several NT users that can log into your PDC with no problems
but your WFW clients cannot, what might the problem be?

3 servers, a group of people use one server occasionally to transfer 10m files back and forth to server1. network uses TCP/IP. network suffers during transfer of the files. what do you do?

a)    assign a new IP address to server1 and configure server1 to use that IP address to form a subnet with all relevant workstations. Configure the subnet so that the transfer will only occur in that particular subnet.

b)    similar to above only install a new NIC on server1

RAS server has to serve a group of remote NT workstations that have no ability to do data encryption. RAS server also has to serve other computers that do not need data encryption at all. NT workstations have to access a database app that is on the network. dB app server requires data encryption. what do you do?

a)    Configure RAS to use data encryption to NT workstations, and do not use data encryption to other clients

b)    Configure RAS to not use data encryption, but Configure dB server to require data encryption

c)    Configure another modem port that requires data encryption and Configure all NT workstation to dial in this port

Mandatory profiles. PDC not available, what will happen?

a)    cannot login

b)    Since PDC not available, can log in using default profile

c)    Can login using man profile, but any changes will be lost

You have 3 servers and 100 workstations all running NT. One of the three servers is used to copy very large file back and forth between some of the workstations. It said when the copying was being done between the server and the workstations it slowed down the other workstations and servers on the net work. It then asked what was the best solution to fix this?